PRODUCTS
304 stainless steel strip with grade, thickness, slit width, edge condition and winding requirements reviewed together.
MATERIAL, CONFIGURED FOR YOU
Prepare a 304 strip inquiry around the material's next operation. State the required standard, thickness and finished width, then define the edge condition and winding geometry that your production line needs.
Width tolerance, burr limits and camber should be specified with the measurement method and acceptance criteria. Published slitting ranges describe individual processing routes; the exact material and dimension combination is reviewed before order confirmation.
| Grade | 304 |
| Standard | Provide the project material standard and required inspection documents |
| Dimensions | Thickness, finished slit width and tolerances |
| Handling | Inside diameter, coil weight, winding direction and edge requirements |
| Order | Quantity, destination and packing requirements |
Published ranges describe individual processing routes, not every possible size and grade combination. Availability, tolerances and acceptance criteria are confirmed for each order.
Discuss this productGRADE REFERENCE
Compare the exact designation, chemical limits and test conditions before specifying material. Related grades are not automatically interchangeable or certified to all four standards.
EN 10028-7
Stainless steel flat products for pressure purposes. Grade, product form, thickness and delivery treatment must match the standard. It is not a bar/profile standard.
Reference: 2016 (DIN EN10028-7:2016-10 current, checked2026-09-09)ASTM A240/A240M
Plate, sheet and strip for pressure vessels and general applications. Flat-product reference data; not bar/profile specifications or guaranteed Sheye stock capability.
Reference: A240/A240M-20a reference tables (current catalogue: A240/A240M-26)JIS G 4305
Cold-rolled stainless steel plate, sheet and strip. These flat-product data do not establish a hot-rolled plate, bar or profile specification.
Reference: JIS G 4305:2021 grade references; steelmaker summaries and explicitly labelled 2012 mechanical rowsGB/T 3280
Cold-rolled stainless steel sheet, plate and strip, including slit wide strip. These values are not hot-rolled plate, bar or profile acceptance limits.
Reference: 2015Mass %. ≤ means maximum; ≥ means minimum. A range includes both limits. “—” means no value published in this comparison; it never means zero.
Scroll the table horizontally to compare all standards.
| Element | EN 10028-72016 (DIN EN10028-7:2016-10 current, checked2026-09-09) | ASTM A240/A240MA240/A240M-20a reference tables (current catalogue: A240/A240M-26) | JIS G 4305JIS G 4305:2021 grade references; steelmaker summaries and explicitly labelled 2012 mechanical rows | GB/T 32802015 |
|---|---|---|---|---|
| Designation | 1.4301 / X5CrNi18-10 | Type 304 / UNS S30400 | SUS304 | 06Cr19Ni10 / S30408 |
| C | ≤0.07 | ≤0.08 | ≤0.08 | ≤0.07 |
| Si | ≤1.00 | ≤0.75 | ≤1.00 | ≤0.75 |
| Mn | ≤2.00 | ≤2.00 | ≤2.00 | ≤2.00 |
| P | ≤0.045 | ≤0.045 | ≤0.045 | ≤0.045 |
| S | ≤0.015 | ≤0.030 | ≤0.030 | ≤0.030 |
| Cr | 17.5–19.5 | 18.0–20.0 | 18.00–20.00 | 17.50–19.50 |
| Ni | 8.0–10.5 | 8.0–11.0 | 8.00–10.50 | 8.00–10.50 |
| N | ≤0.10 | ≤0.10 | — | ≤0.10 |
Rp0.2 is 0.2% proof strength; Rm is tensile strength; A is elongation. The delivery condition, product form, thickness and specimen basis belong to the value. Rows identify the reference specification or manufacturer summary and its qualifications; values are not design allowables.
| Standard / designation | Condition & thickness | Rp0.2 | Rm | Elongation | Hardness |
|---|---|---|---|---|---|
| EN 10028-71.4301 / X5CrNi18-10 | Solution annealed; C (cold-rolled strip); transverse proof-strength test; rolling width ≥300 mmt ≤8 mm | Rp0.2 ≥230 MPa | 540–750 MPa | A80 (t <3 mm) ≥45%; A (t ≥3 mm) ≥45% | Not specified in this comparison |
| Rp1.0 ≥260 MPa. Standard Table9. A uses L0=5.65√S0. Separate provisions apply to narrow strip and stretcher-levelled material. | |||||
| EN 10028-71.4301 / X5CrNi18-10 | Solution annealed; H (hot-rolled strip); transverse proof-strength test; rolling width ≥300 mmt ≤13.5 mm | Rp0.2 ≥210 MPa | 520–720 MPa | A80 (t <3 mm) ≥45%; A (t ≥3 mm) ≥45% | Not specified in this comparison |
| Rp1.0 ≥250 MPa. Standard Table9; product dimensions shown are standard test categories, not Sheye supply ranges. | |||||
| EN 10028-71.4301 / X5CrNi18-10 | Solution annealed; P (hot-rolled plate); transverse proof-strength testt ≤75 mm | Rp0.2 ≥210 MPa | 520–720 MPa | A ≥45% (L0=5.65√S0) | Not specified in this comparison |
| Rp1.0 ≥250 MPa. Standard Table9. Plate dimensions shown are standard test categories, not Sheye supply ranges. | |||||
| ASTM A240/A240MType 304 / UNS S30400 | Annealed / heat-treated flat-product reference; confirm A480/A480M delivery requirementsNo grade-specific thickness split in the cited Table 2 row | ≥205 MPa (0.2% proof) | ≥515 MPa | ≥40% (50 mm gauge length) | ≤201 HBW or ≤92 HRBW |
| JIS G 4305SUS304 | Solution-treated cold-rolled plate, sheet and strip; room-temperature reference limitsNo separate grade-specific thickness band is shown in this public summary; confirm thin-gauge test provisions in the contractual standard. | ≥205 MPa (0.2% proof stress) | ≥520 MPa | ≥40% | HV ≤200 |
| Public steelmaker JIS-grade summary, not typical measured values. Specimen type, direction, gauge length and any test exemptions require the contractual JIS edition. | |||||
| GB/T 328006Cr19Ni10 / S30408 | Solution treatedCold-rolled flat products; see test-thickness notes | ≥205 MPa | ≥515 MPa | ≥40% | HBW ≤201 / HRB ≤92 / HV ≤210 |
| A50 for t ≤3 mm; elongation/hardness reference only if t <0.3 mm. | |||||
ASTM A240 covers flat products; EN 10028-7 is for pressure-purpose flat products. JIS G4305 and GB/T 3280 cover cold-rolled flat products. Their cold-rolled values must not be used as acceptance limits for hot-rolled plate, bars or profiles. Confirm the standard edition and all supplementary requirements in the purchase order and mill test certificate.
Chemical values are cast-analysis mass percentages. A dash/omitted element means no limit stated in the selected table, never zero content. Cross-standard grade names are comparison references, not automatic equivalence or proof of Sheye certification.
Common 304-family EN reference; cross-standard certification must be checked by heat. The elongation rule for stretcher-levelled C/H material requires Table9 footnote g review.
Chemistry is heat-analysis mass percent. Omitted elements have no requirement in the cited row, not zero. A480/A480M governs product-analysis tolerances and general requirements. Mechanical values use the printed SI column. ASTM regards SI and inch-pound systems as independent: do not convert ksi to generate an SI acceptance limit. Room-temperature Table 2 reference properties. Confirm delivery heat treatment, specimen preparation, dimensional tolerances and all general requirements against the contractual A480/A480M edition. Yield is based on 0.2% offset; a 0.5% total-extension-under-load alternative is permitted unless otherwise specified. Elongation gauge length is 50 mm or 2 in. HBW and the specified Rockwell scale are alternative permissible methods; thin-gauge superficial hardness provisions apply. The full 2026 numerical tables were not available for verification. Display the reference edition and confirm the contractual edition and certificate before accepting an order.
ASTM20a specifies Ni8.0–11.0%; do not substitute a JIS band or a narrower mill target.
JSA confirms the 2021 edition remains valid and was reaffirmed on 20 October 2025. Full purchased normative tables and all footnotes were not available for a complete current-edition audit. Listed chemistry is mass percent from primary JIS-grade summaries, not typical mill analysis. Missing cells mean not reproduced or not verified, not zero. Mechanical limits apply to the stated annealed/solution-treated cold-rolled condition at room temperature. Sampling, gauge length, direction, thickness-related rules and acceptance methods require the contractual standard. Corresponding designations are comparisons, not unconditional equivalence or proof that every supplied heat meets all listed standards.
Chemistry is the JSSA published JIS grade limit summary, mass %. An omitted element is not a zero-content requirement. Reference grade comparison only; certification to one standard does not automatically establish compliance with another.
Chemistry is heat analysis, mass %. The GB designation is a related reference, not automatic cross-standard certification. For thickness below 0.3 mm, elongation and hardness are reference values only. A50 is used at thickness ≤3 mm. Mechanical testing of re-rolling feedstock is performed when requested and specified in the contract (8.2).
Reference review: 9 September 2026 · Sheye Metal
← Explore all Stainless Steel Strips
SURFACE SELECTION
Compare BA, 2B, No.1, No.3, No.4 and mirror terminology, then confirm the applicable finish for your product.
State the thickness and width tolerances, edge and burr requirements, and any camber limits. Include acceptance and measurement conditions.
The quotation reviews the exact grade, standard, dimensions, surface and processing requirements. Confirm the agreed specification and inspection documents before placing an order.
RELATED CAPABILITY
Three complementary lines. One coordinated plan for width, edge and winding.
Explore the processLET'S TALK ABOUT YOUR NEXT ORDER
May we use optional analytics cookies to understand visits and improve our website? You can use our website and send inquiries either way.
With your permission, Google Analytics and our self-hosted Matomo analytics measure visits, referring websites, pages viewed, approximate countries, device types and inquiry, email, WhatsApp and WeChat QR-code interactions. Matomo stores masked IP addresses and visit histories on our website hosting infrastructure; individual records are kept for 90 days. We do not send your inquiry content, name, email address or phone number to either system. Analytics cookies identify a browser and expire within 6 months; Matomo session cookies last 30 minutes. Your choice is remembered for 6 months. Google may process analytics data outside your country. Withdraw permission any time using Privacy choices to stop future collection and clear our analytics cookies.
