PRODUCTS
Stainless steel. In the form you need.
Explore coils, strips, sheets, plates, bars and profiles. Choose a product form, then refine your grade, shape and finish requirements.
01COILS
Stainless Steel Coils
- Finish
- 2B / 2D / BA / No.4 / HL / 8K
- Finish
- No.1 / 1D
- 304
- 304L
- 316L
- 430
- 201 1%Ni
- 321
- 310S
02STRIP
Stainless Steel Strips
- 304
- 301
- 316L
- 321
- 309S
- Hypodermic Needles
- Pen Tubes
- Corrugated Pipes
- Electric Heating Tubes
- Stamping Parts
- Optical Cables
- Precision Tubes
- Hard Products
03SHEETS
Stainless Steel Sheets
- Finish
- 2B / BA / No.4 / HL / 8K
- 304
- 304L
- 316L
- 430
- 201 1%Ni
- 914 × 3048
- 1000 × 2000
- 1219 × 2438
- 1250 × 2500
- 1500 × 3000
- 1524 × 3048
- 1500 × 6000
- 2000 × 6000
04PLATES
Stainless Steel Plates
- Finish
- No.1 / 1D
- Finish
- No.1 / 1D
- 304
- 304L
- 316L
- 321
- 310S
- 310Si2
- 2205
- 2507
STAINLESS STEEL
Stainless Steel Bars
- Shapes
- Round / Flat / Square / Hexagonal
- 304
- 304L
- 316L
- 303
- 304F
- 410
- 420
- 430
- 431
- 310S
- 2205
- 904L
Round Bar
- Cold drawn
- Ø3–16 mm
- Ground
- Ø3–60 mm
- Hot rolled
- Ø16–130 mm
- Forged
- Ø130–600 mm
Flat Bar
- Cold rolled
- From 2 × 10 mm
- Hot rolled
- Sizes on request
- Slit from HR coil
- 3–8 mm thick; widths from 20 mm
- Cut from plate
- 9–16 mm thick
Square Bar
- Cold drawn
- 3 × 3 to 100 × 100 mm
- Hot rolled
- 14 × 14 to 200 × 200 mm
Hexagonal Bar
- Cold drawn
- S3–S60 mm
- Hot rolled
- S14–S80 mm
- Finish
- Pickled / Sandblasted / Brushed / Custom, including mirror polish
STAINLESS STEEL
Stainless Steel Profiles
- Shapes
- Angles / Channels / Special Profiles
- 304
- 304L
- 316L
Angles
- Size range
- 20 × 20 × 3 to 200 × 200 × 24 mm
Channels
- From · No. 5
- 50 × 37 × 4.5 mm
- To · No. 16
- 160 × 63 × 6.5 mm
- Process
- Hot Rolled / Bent / Welded
- Finish
- Pickled / Sandblasted / Polished
Core grades include 304, 304L, 316L and 430. Availability is reviewed by product form, dimensions, finish and quantity.
GRADE SELECTION
Compare grades before choosing a product.
Use this selection overview, then open the grade guide for chemical limits, mechanical properties and the applicable standard conditions.
QUICK GRADE COMPARISON
Start with the application. Check the specification.
Use these common grades as a starting point, then compare the chemical limits, mechanical properties and conditions in the detailed material guides.
On smaller screens, scroll the table sideways to view every column.
| Grade | What to review | Typical applications | Technical data |
|---|---|---|---|
| 304Austenitic | General forming and fabrication; check the service environment and required finish. | Kitchen components, equipment housings and general fabrication. | Chemical compositionMechanical properties |
| 304LLow-carbon austenitic | Welded fabrication; specify the grade, welding requirements and certificate. | Welded tanks, vessels and fabricated equipment where the specification permits. | Chemical compositionMechanical properties |
| 316LMolybdenum-bearing austenitic | Corrosive service; review chemicals, chlorides, temperature and cleaning conditions. | Process equipment and components with higher corrosion-resistance requirements. | Chemical compositionMechanical properties |
| 430Ferritic | Appearance and forming requirements; assess welding and the exposure conditions. | Appliance panels, decorative trim and suitable indoor applications. | Chemical compositionMechanical properties |
Applications are selection examples, not material approval. Confirm the product form, standard edition, delivery condition and actual mill certificate; related grade names do not establish automatic equivalence.
MATERIAL REQUIREMENTS
Explore stainless steel grades.
Select a grade, then confirm the product form, standard and dimensions for your requirement.
CHOOSE YOUR SURFACE
One material. Different finishes.
Compare BA, 2B, No.1, No.3, No.4 and 8K mirror terminology. Select by appearance, processing and acceptance requirements.
LET'S TALK ABOUT YOUR NEXT ORDER