INSIGHTS

Closer to the process.

Practical notes on stainless steel, precision processing and the details behind a well-prepared order.

A 316L stainless steel sheet covered with white-faced protective film on the processing line, with a tape laid across its diagonal.

FACTORY & DELIVERY

316L 6mm 2B stainless steel sheet for Serbia: 1250 × 2500mm

Sheye supplied TISCO cold rolled 6mm 316L 2B sheets for equipment with demanding exposed surfaces in Serbia, cut to 1250 × 2500mm and protected with black-and-white film.

8 min read

Stack of 304 No.4 stainless steel sheets protected with Novacel laser film on the processing line.

FACTORY & DELIVERY

304 No.4 0.7mm stainless steel sheet with Novacel 4228 for Peru

A Peru order for 0.7 × 1219 × 2438 mm 304 No.4 sheets combines Novacel 4228 film, flush-trimmed edges and documented processing and inspection.

7 min read

Inkjet marking on a 304 2B stainless steel sheet showing ASTM A240, A480, 4 by 1524 by 6096 mm and heat number A1600287.

FACTORY & DELIVERY

304 2B 4mm stainless steel sheet for Colombia: 1524 × 6096mm with slit edges

A Colombian order for 4 × 1524 × 6096mm cold rolled stainless steel sheet shows how Sheye Metal prepares 5-foot widths, checks dimensions and preserves material traceability.

7 min read

Fine bright specks across a reflective 430 BA stainless steel surface beside a hand.

MATERIAL & FINISH

Why does 430 BA stainless steel shed gold dust?

Fine flakes on 430 BA can reveal a surface problem that began much earlier in production. Explore the gold dust mechanism and Sheye Metal's film check before coil processing.

7 min read

Wide NO.1 stainless steel plates stacked on protective packing material at Sheye Metal.

FACTORY & DELIVERY

304L 8 × 2000 × 6096 mm Hot-Rolled Stainless Steel Plate for Malaysia

TISCO 304L No.1 plates, 8 × 2000 × 6096 mm, prepared for an equipment manufacturer in Puchong, Malaysia, with mill-certificate data, dimensional checks and protective packing.

7 min read

Long 304 2B stainless steel sheets stacked beside Sheye Metal's cut-to-length line for a Colombia order

Factory & Inspection

6mm cold rolled 304 stainless steel sheet, 2B finish: a Colombia order

A Colombia order for 6 × 1524 × 6096mm 304 2B sheets shows how Sheye Metal combines TISCO stock, cut-to-length processing and documented dimensional and PMI checks.

5 min read

Sheye Metal colleagues, some in workwear and hard hats, standing behind birthday gifts.

Company & Team

Sheye Metal’s October Birthday Celebration: Every Colleague Matters

Cakes, carefully prepared gifts and familiar smiles: Sheye Metal’s October birthday celebration reflects a monthly tradition of caring for every colleague, from the production floor to the office.

3 min read

Sheye Metal editorial cover comparing 304 and 304L stainless steel, with two illustrated TISCO MTC case-study cards.

Material & Finish

304 vs 304L Stainless Steel: More Than a Carbon Difference

304L has less carbon, but that is not the complete purchasing story. Compare GB/T 713.7—2023 requirements and two actual ASTM mill certificates to understand composition, strength, welding and dual certification.

9 min read

Full view of a wide stainless steel plate on a protected stack in the Sheye Metal workshop.

Factory & Delivery

316L 2000 mm Wide Stainless Steel Plate for Indonesian Equipment

An Indonesian chemical-equipment order shows how TISCO 316L No.1 plate in 8 × 2000 × 6000 mm can reduce joining work, with heat traceability, PMI screening and close-up dimensional checks before dispatch.

7 min read