INSIGHTS

Closer to the process.

Practical notes on stainless steel, precision processing and the details behind a well-prepared order.

Reflective stainless steel coil on a workshop mandrel, with white interleaving paper visible between the wraps.

FACTORY & DELIVERY

430 BA 0.28mm thick stainless steel coil for Brazil

A Brazil order for 430 BA coil in 0.28 × 1000 mm: pre-shipment inspection, protection for the bright surface and sourcing options from Sheye Metal.

6 min read

Full view of a thick stainless steel plate in the Sheye Metal workshop.

FACTORY & DELIVERY

25mm thick 304 stainless steel plate for Ecuador

A 304 No.1 plate order for Ecuador in 25 × 1524 × 3048 mm, with solution-annealing guidance, 304L selection considerations and actual PMI and dimensional inspection photographs.

7 min read

Long stainless steel sheet packs supported on metal frames in the Sheye Metal workshop.

FACTORY & DELIVERY

2000mm wide 304 2B stainless steel sheet for Australia

An Australian order for 304 2B sheet in 3 × 2000 × 6000 mm: TISCO parent-coil identification, in-process dimensional checks, protective film and galvanized steel-frame packing.

8 min read

Technical magazine cover showing 309S, 310S and S30815 grade names beside stainless steel plate sections in a furnace concept illustration

MATERIAL & FINISH

310S vs 309S vs 253 MA: Choosing Heat-Resistant Stainless Steel

Three mill certificates provide a practical comparison of 309S, 310S and S30815 chemistry and mechanical results, alongside guidance on temperature, atmosphere and load.

10 min read

A 316L No.1 stainless steel plate on the cut-to-length line with a tape measure across its diagonal.

FACTORY & DELIVERY

316L 10mm hot rolled stainless steel plate for Egypt

Sheye Metal supplies 316L No.1 plate in 10 × 1500 × 3000 mm for an Egyptian equipment manufacturer. See the order’s thickness checks, dimensional inspection, plate marking and processing video.

6 min read

Technical magazine cover comparing 304 and 430 stainless steel for food equipment, with stainless sheet, a vessel and a kitchen panel

Material & Finish

304 vs 430 Stainless Steel for Food Equipment: How to Choose

304 and 430 serve different food-equipment and kitchen applications. Compare their practical uses, read two TISCO coil certificates, and see why surface condition and intended use belong in the specification.

10 min read

310S stainless steel plates on wooden supports in the Sheye Metal warehouse

FACTORY & DELIVERY

TISCO 310S Stainless Steel Plate 12mm for an Indonesian Factory

Sheye Metal supplied 12 × 1500 × 3000 mm TISCO 310S plate for furnace and heat-treatment equipment, with mill documentation, PMI and dimensional checks.

8 min read

Technical magazine cover comparing 304DQ, 304SQ and 304BQ, with a stainless-steel sheet and drawn cup

MATERIAL & FINISH

304DQ vs 304SQ vs 304BQ: How to Choose Deep-Drawing Stainless Steel

DQ, SQ and BQ are not a universal quality ranking. Compare mill product positioning, two TISCO Tianguan certificates and the forming evidence a buyer needs.

9 min read

Stack of 0.8 × 1500 × 3000 mm 304 No.4 stainless steel sheets covered with NOVACEL laser film on the processing line.

FACTORY & DELIVERY

304 No.4 4228 stainless steel sheet 0.8 × 1500 × 3000mm for the UAE

For a UAE architectural decoration contractor, Sheye processed 0.8mm 304 No.4 sheets with 1520mm-wide Novacel 4228 film, trimmed flush to the 1500mm sheet edges.

8 min read